PanaVise 350 - Multi-purpose swivel vice

HR81023

PanaVise Catalog

PanaVise Catalog

Sold out. We can let you know when it is available.

Quantity

VAT NOT INCLUDED

VAT INCLUDED

154.91 €

187.44 €

Identification

EE Code HR81023

Brand

PanaVise

Model 350

Manufacturer code 350

EAN13

Features

Have you ever found yourself unable to keep that project steady on the bench as you work on it? Losing screws and small SMD components over the course of your project? Typical vices are far too clunky to use effectively for small solder jobs, so don't. Our friends over at Panavise had these very problems; so they made their very own solution. The Multi-Purpose Work Center.

This workstation is the heavyweight contender for bench-top tools, boasting an impressive combination of features. The best part is it is designed for holding all manner of objects in all manner of orientations. The PanaVise patented "split-ball" base allows for movement in the tilt-turn and rotation axis, meaning there's no part of your project you cannot reach in a pinch.

The Jaws of the vice open to a full 228.6mm and hold heavier objects by self-centering the weight over the base.
The Parts Tray Base Mount adds stability to your workstation. Giving the total width of the base a measure of 215.9mm diameter. It has six compartments that allow you to quickly store small parts and tools. Don't worry about your station sliding along a bench either, there are 6 anti-slide pads that come with the Base Mount.
To hold your projects safely without damage you'll get 2 ribbed, neoprene jaw pads. These are 47.6mm high x 38.1mm wide and provide a great grip for your project. If you're worried about holding cylindrical objects in your PanaVise, you can simply reverse the pads and use the V holds to easily grip them! reverse the pads and the wide "V" holds cylindrical objects
The Split Ball is easily controlled using the single knob on the side of the unit. It allows you to have movement through 3-planes:
- 90º Tilt
- 360º Turn
- 360º Rotation
The jaws open and close very quickly, using a double action slider.
All PanaVise 300 Series Heads are supported on your PanaVise Work Center. Actually, any head with a shaft of 15.9mm will work with your station.
Overall dimensions of the PanaVise 350 Work Center are Height: 200mm, Weight: 2.3kg

Specifications

Type of base	Tray
Jaw Face	V-grooved
Jaw material	Ribbed neoprene
Jaw width	1 13 / 16 "
Material	Cast zinc
Maximum opening	9-1/4"
Overall height	7,875"
Total length	11.5"
Average width	8,437"
Pipe capacity	1"
Turning angle	Degrees 360
The depth of the throat	1-9/16"