Supplied with 1 T900-B tip, although up to 5 can be placed in the soldering station itself
Available
80W soldering station with LED display.
2 in 1 design of soldering station and soldering iron stand.
MCU controlled temperature calibration with PID system equipped.
Four-core ceramic heater.
Support ℃ and F switchable.
Scientific ergonomic handle, comfortable to hold.
Temperature lock function, auto standby and sleep function.
Easy Temperature Setting
It can adjust temperature rapidly by temperature knob, the setting temperature will be shown when adjusting temperature, the real temperature of soldering tip will be displayed after stopped adjusting temperature for 3 seconds. Temperature range is 80~480℃.
Temperature Lock Function
Press LOOK/℃/℉ button for 3 seconds at the same time, current temperature will be locked and display LOC for locking temperature. It can unlock by pressing LOOK/℃/℉ button for 3 seconds again.
Auto Standby Function
When the soldering not in use and put the soldering iron on the iron holder, it will auto standby after 10 minutes, heater temperature will drop to 200 ℃, nixie tube display STB, pick up the soldering iron and back to normal working mode.
Auto Standby Function
In auto standby mode, the soldering station will auto sleep after 20 minutes, nixie tube display SLP, it will get back to normal work mode by adjusting the knob or pressing the button.
Fault Alarm Function
E02 shown on the display screen means there is error for sensor.
Optional replacement tips ATTEN AT-937A, AT-980E, ST-965, ST-2090D :
HRJFA01: ATTEN T900-0.8D; Flat Soldering Iron Tip 0.8x0.6 mm
HRJFA04: ATTEN T900-1.2D; Flat Soldering Iron Tip 1.2x0.7 mm
HRJFA07: ATTEN T900-1.6D; Flat Soldering Iron Tip 1.6x0.5 mm
HRJFA09: ATTEN T900-2.4D; Flat Soldering Iron Tip 2.4x0.5 mm
HRJFA33: ATTEN T900-IS; Bent Conical Soldering Iron Tip Ø 1 mm
Power consumption: 80W
Soldering tip supplied with the station: 1 x T900-B (HRJFA23)
Voltage: 220VAC ±10% / 50Hz
Display method: LED
Temperature range: 80~480℃ (176 ～896℉)
Temperature offset range: ±50℃ (±90℉)
Temperature stability: ±2℃ at idle temperature
Tip to ground resistance: <2Ω
Tip :to ground potential: <2mV
Temperature accuracy: ±15℃
Temperature adjustment: Knob control
Heating element: Four-core PTC heater
Solderint tip: T900-B
Dimensions: 20*18*12.5 cm
Net weight: 0,7Kg
