Sold out. We can let you know when it is available.
With four spool slots, fast and simultaneous heating and automatic humidity control, the FilaDryer S4 from Sunlu keeps sensitive filaments dry and protects them from moisture.
Large capacity
The FilaDryer S4 has an internal size of 450 x 210 x 211 mm and offers space for 4 x 1 kg filament spools (with a max. spool dimension of 75 x 206 mm).
Intelligent PTC heating element
A 330-watt PTC heating element reaches a temperature of 50 °C in half an hour. The maximum heating temperature is 70 °C.
Triple security protection
An integrated triple safety protection helps monitor the temperature in real-time and warns of any anomalies:
► At abnormal temperatures the PTC element stops heating,
► A two-stage safety switch for temperature control interrupts the circuit as soon as the temperature reaches too high a value,
► Software protection warns of other abnormal occurrences.
Dynamic temperature compensation
The FilaDryer S4 has an integrated triple fan system (two circulation fans + one heating fan) that ensures that the heat inside the dryer is dynamically adjusted or the temperature is balanced to ±3 ℃ in order to dry the filaments evenly.
Automatic humidity control
In order to better meet the requirements of different types of materials, the humidity in the dryer can be adjusted as needed:
Wide compatibility
The FilaDryer S4 is compatible with most 3D printers and supports the simultaneous use of four devices.
Tip: Filaments with a diameter of 1.75 mm, 2.85 mm and 3.0 mm are supported.
Included:
| Heating temperature | 70°C |
| Filament capacity | 4 x 1 kg spool |
| Supported filaments | PLA, ABS, PETG, TPU, PA, PC |
| Heating element | PTC with 3 fans |
| Heating time (25–50 °C) | 30 min |
| Heating time (25–70 °C) | 50 min |
| Device display | Touch screen |
| Operating status display | LED ring light |
| Filament outputs | 8th |
| Device size | 458x218x312mm |
| Device weight | 5.5kg |
| Input voltage | AC110V-240V 50-60Hz |
| Rated power | 320W |
