Available
Oscilloscope + multimeter + Wave generator, multifunction in one
3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use
18650 lithium battery, comprehensive power consumption ≤3W, can work continuously for about 6 hours
USB Type-C interface, support power bank, support PC software connection
Self-calibration function
SCPI supported, facilitate secondary development
Oscilloscope:
Bandwidth: 70MHz
Channels: 2
Sample Rate: 250MSa/s
Acquisition Model: Normal, Peak, detect
Record Length: 8K
Display: 3,5" LCD
Max. input Voltage: 400V (DC+AC, PK-PK, 1MΩ input impedance) (10:1 probe attenuation)
Probe Attenuation Factors: 1X,10X,100X,1000X,10000X
Input Impedance: 1 MΩ±2%, in parallel with 16pF±10pF
Horizontal Scale: 5ns/div - 1000s/div, step by 1 - 2 - 5
Vertical Sensitivity: 10mV/div - 10V/div
Trigger Type: Edge
Trigger Modes: Auto, Normal, single
Automatic Measurement: Period, Frequency, Mean, PK-PK, Max, Min
Cursor Measurement: ΔV, ΔT, ΔT&ΔV between cursors
Communication Interface: USB Type-C
Multimeter:
Max. Resolution: 20,000 counts
Testing Mode: Voltage, Current, Resistance, Capacitance, Diode ,and Continuity test
Input Impedance: 10MΩ
Max Input Voltage: AC 750V, DC 1000V
Max Input Current: DC : 10A AC : 10A
Diode; 0 - 2V
Waveform Generator:
Frequency Output:
Sine: 0,1Hz ~ 25MHz
Square: 0,1Hz ~ 5MHz
Ramp: 0,1Hz ~ 1MHz
Pulse: 0,1Hz ~ 5MHz
Sampling Rate: 125MSa/s
Channel: 1
Ammplitude Range: 20 mVpp ~ 5 Vpp
Waveform Length: 8K
Vertical Resolution: 14 bits
Output Impedance: 50Ω
